Making a Double Cowgirl Muskie Bucktail

Making a Musky Bucktail

(Double Cowgirl Inline Spinnerbait)

The “Double Cowgirl” spinnerbait is one of our favorite baits to throw for Musky. No matter what the conditions are. Even if you can’t get the fish to bite, these oversized “Mepps” style baits will always raise fish off of the bottom, out of aggression or out of sheer curiosity. Considering it costs between $20-$30 for just one bait, we took it upon ourselves to learn how to make them at home. Not only to save money, but to make the color patterns you simply cannot buy. Here’s how we do it…

          Materials needed- (Most components were purchased at Muskyshop.com or Lurepartsonline.com, whichever is cheapest.

·        .051 gauge wire

·        #8 - #12 size blades (personal preference)

·        Mustad 5/0 3X strong treble hooks

·        Regular Flashabou or Magnum Flashabou

·        Lure Bodies

·        Lead Lure Bodies (optional)

·        3/16” Pop Rivets or Size 16 – 14 Solder Grip Heat Shrink Splices

·        Brass Beads

·        Extra Large Clevises

·        Large Heavy Strength Split Rings

·        1/8” – 1/4” Heat Shrink Tubing

Tools needed-

·        Fly Tying Vice or Work Bench Vice (It’s possible to tie without one, however it is very difficult)\

·        Fly Tying Bobbin

·        Screwdriver

·        Needle Nose Pliers

·        Channel Lock Pliers

·        Split Ring Pliers

·        Lighter

·        Sally Hansen’s Hard as Nails

·        Super Glue

·        Scissors

Tying the Bait

1)    First things first take one of your .051 gauge wire rods and feed one or more small brass beads onto the shank, your preference as to how many.

2)    This step is very critical. Feed both of your blades and clevises onto the lure shank. When you do so be sure that your clevises are interlocking (see photo) this allows your blades to spin in unison. If you do not do this correctly then your blades will lay on each other and prevent one another from catching water.

3)    Slide brass lure body onto the shank.

4)    (Optional) Slide lead lure body onto the shank.

5)    Slide a clevis holding a split ring attached to a 5/0 Mustad treble onto the shank.

6)    Place either the heat shrink tubing or the pop rivet in the fly vice and begin by laying down a layer of thread for your flashabou to grip onto. Once you have a good base layer begin evenly distributing the flashabou around the rivet or tube. Then begin to wrap over top of the flashabou on the shank until firmly secured then tie it off with a “whip finish” or another finishing knot. Once you have a knot proceed by cutting the thread just above the knot and generously coat the thread with the Hard as Nails. The more you use the better the thread will be protected from the Muskies sharp teeth, I generally use three coats. (If you are using the rivets, once the Hard as Nails has dried take two pairs of pliers and pull the center pin out of the rivet by gripping the rim of the rivet with one pair and the bulge of the center pin with the other then pull apart. *Repeat as Necessary.

7)    Slip your flashabou sections onto the wire shank in your preferred order. If you are using the rivets be sure that the rim is on the bottom as you feed it onto the shank, this allows the flashabou to flair out and look nice…. However it won’t make much difference once it gets wet, it will never return to its original form once dry anyways.

8)    Once you have all of your components in place you then proceed to create a loop at the bottom of your bait. You do this by bending the wire around the shank of the screwdriver using the pliers. Once you have a relatively round eyelet made you then wrap the wire back around itself up the shank about three to four times. The wire you are using is very strong, therefore, it isn’t necessary to have very many wrap or very tightly wound wraps, a few loose wraps will hold. Keep in mind, bending this wire is not easy, it may take a few tries to get it right and it definitely won’t look perfect. That being said, as long as you can get a loop made with a few wraps to secure it, it will work.

9)    Once you have a loop made slip a 1 ½- 2 inch length of shrink tubing over the loop and just beyond that way you can still access the loop.

10)       Once you have the shrink tubing in place proceed by attaching another 5/0 Mustad treble hook to the loop using a split ring.

11)       After you attach the hook, slide the heat shrink back down onto the shank of the hook and heat it up with a lighter. When the tubing constricts the wire shank, the split ring, and the hook equally it will prevent the hook from swinging freely and knotting up within the flashabou. This is very important and can prevent many headaches down the road.

This concludes the process of tying your Musky inline spinnerbait. As always, the more practice you have at tying these baits the easier they will be to tie. If you produce enough of them using the components that you have purchased, you will save close to half of the price of prepackaged bait. Make sure you enjoy the way these baits look after you have them completed, once they touch the water they will never look as neat and regal as they did before they got wet. Your baits will become knotted and nappy and will appear nowhere near as awesome as they once were. However, don’t let their image in the tackle box fool you, these baits will forever and always be just as effective as the first time you threw them, no matter how knotted they become. The flash puts off a free flowing motion that muskies simply cannot ignore. Nothing is quite as rewarding as catching one of these toothy beasts on a bait you have crafted yourself, it’s a feeling of supreme accomplishment that makes the entire process worthwhile. For additional into and questions on how to tie these baits or for anyone wanting to acquire one we produced ourselves feel free to contact us at peelindragextremefishing@gmail.com. Thanks!

Fish Hard or Stay Home,

Josh D.

Subscribe to this website for updates on new posts!

Enter your email address:

Fish Hard or Stay Home "The Lifestyle"

       It's been a great year on the water! We are proud to present our 2014 year in review. Here's to an epic 2015!

Blue Ridge Beasts

Blue Ridge Beasts

            As the weather cools here in Virginia, Grant and I look forward to the unique opportunities that occur with cold water. With the temperature dropping steadily most fish migrate toward deeper pools to wait out the winter. While most anglers hang up the rods for the year and wait for warmer days, we however do not. Braving frigid mornings and dealing with frozen rod guides is just the price you have to pay for capitalizing on these concentrated fish patterns.

            The Blue Ridge Mountains are where we like to stomp around in winter. Although the weather is always colder and the winds more bitter than anywhere else in Virginia; Appalachia is the perfect place to chase fish through the colder months. The reasoning is simple; the mountains stay cooler longer throughout the year allowing for more cool water species such as Muskie, Trout, and Yellow Perch to thrive. Where most warm-water species become sluggish and difficult, often times these cool-water fish heat up as the temps drop.

That being said, Grant and I recently took our annual trip to the New River in hopes of landing a few Muskie like we had the previous year. With the truck loaded down for a weekend full of monotonous casting and relentless determination…. We hit the road. It takes a certain type of mindset to pursue these fish. One must not expect too much all the while staying confident in your abilities; it’s truly a nerve wracking experience than is only accelerated by attempting to do it in a kayak

Day number one was as cold and frigid as it was entertaining. We started the day out with temps in the mid-teens and 5-10mph winds that spit a good deal of snow on us for most of the day. Though it was difficult to leave the comfort and warmth of the truck, the mythical lure that the toothy beasts possess is simply too much to ignore and we hit the water. As if the weather wasn’t enough to burn this day into our memory it quickly got more interesting the farther we moved up the river. No more than 200 yards from the ramp we managed to see two stellar Whitetail bucks, one of which I’m certain would have been Boone and Crockett class, and if that wasn’t cool enough we we’re suddenly subject to the roar of an Air Force fighter jet as it shot directly over us what seemed like mere feet before it disappeared straight up into the clouds that came from. Anyhow, enough with the longwinded storytelling, we quickly began seeing our subjects in the clear New River water and before we knew it I was hooked up on a good sized Muskie. After t-boning my Savage Gear line thru swimbait she put up a brief fight and was in and out of a photo-shoot before she knew what hit her. The weather on the first day made fishing difficult and other than Grant having a fish come unbuttoned on the way back to the ramp, that’s all the Muskie action we had for the first day.

(My first Muskie in my brand new Jackson Kayaks Big Tuna from Appomattox River Company!)

Days two and three were completely different ballgames all together. On the second day we were met with clear skies and temps in the 40s, little to no wind. The resulted in perfect conditions to spot the fish we were chasing, and that we did. Where we only saw 7 fish all day the first day, this time up the river we saw 7 within the first few hundred yards. For those of you who are aspiring kayak Muskie fishermen seeing these fish can be just as exciting as hooking into one, it’s an adrenaline rush unlike any other in the freshwater field. Like I stated previously, chasing these fish is always a challenge, however, we aided our efforts this go around by adding some live bait to the mix. Absent on day one, dropping live fish down to the depths for these predators almost always puts the advantage in your favor. It wasn’t long until Grant stuck one under the boat and after a few stunning aerial displays he had the ‘Ski subdued. It wasn’t long before I followed suit and landed a fish out of the same stretch of water, almost identical in length at about 37-38 inches one could swear it was the same fish if he so did please.

Our final day on the New was a heartbreaking one. Not only were we leaving this angling paradise for who knows how long….. it managed to keep a piece of my sanity there with it. The day started out wet and rainy, overcast, not great for seeing the fish but overall good conditions for clear water Muskie hunting. We were pleased with how the trip had gone up until this point. We had our brand new cameras along, filming all of the catches with pleasing detail for our upcoming series of episodes to be released in 2015. We were just missing our grand spectacle, a trophy quality New River beast. A video on Muskie isn’t complete without one, even if you are filming from a kayak. We got a few glimpses of some hefty fish soon enough, just couldn’t get any of them to commit. The sand was running out of our hour glass and it was beginning to look like we would go home with just three fish…. almost. Zero hour was approaching and I got a promising tug from my live bait rod deep underneath the kayak. Grant got the camera fired up and I ambushed the ambusher with a stiff hook set. I could feel the enormous weight of the fish and both Grant and I simultaneously had the same thought, “there’s no way this is a Muskie”…. It’s just too heavy. Well that thought quickly flew by as I got a glimpse of the beast that lay before me, a Muskie I can only describe as an upper 40s fish, around 48 inches I’d say. There was only one problem; my treble was in the very tip of the fish’s snout. After a few defiant, drag ripping dives the fish came straight at me, and with one powerful headshake she threw my only connection between a good memory and a nightmare I’m not sure that I’ll ever forget.  After crying about it for about an hour we turned tail and headed for the ramp, soaking wet and broken. Although the rain darkened the skies, it wasn’t completely dark yet… that being said, neither of us are ones to quit so we continued to fish our way back. Wouldn’t you know it we both hooked up within minutes of one another, mine on live bait and Grant’s on the same style swimbait I had success with. As the sun faded we couldn’t help but feel pleased, yet, unfulfilled.

(Trying to cope with the tragedy)

Although landing five average size Muskie is nothing to shake a stick at, we could help but feel disappointed in what we left on the table. Five may be good, but seven with a monster kicker is better! All in all it was a great trip to the New. We got a few good fish on camera for our new series and that’s more than what we truly expected. The New is always a memorable and fun time… although I can’t help but think we’ll be back soon to restore our sanity. That’s part of the game we play and sometimes you just have to pay the Pied Piper.

Fish Hard or Stay Home,

Josh D.

Appalachia Mini Trips

            Although its not enough content for a full report, Grant and I both made separate runs up to the mountains for Trout. I went up first with my good buddy Wayne Tu from Yakattack to chase some healthy stocked Rainbow Trout. It was my first time casting a fly rod at live fish and I managed to score with a nice little chunk Rainbow.

            Grant ran a little more remote the day following and managed to get on some absolutely beautiful native Brook Trout. Native Brookies are becoming harder and harder to find these day with the effects that man and Mother Nature have on their environments. That being said, catching these stunning wild trout is something that is held in high regard not only in Virginia but across the country as well!

Fish Hard or Stay Home,

Josh D.